Kre-o Microchangers Collection 2 variant or database wrong?

Started by Tripredacus, December 20, 2015, 02:13:51 PM

previous topic - next topic
Go Down

Tripredacus

Kre-o Microchangers Collection 2
http://www.shmax.com/products?q_filters_toyline=3724

Differences with checklist on the package.
Protectobot Groove, not Autobot Groove. Also has Protectobot prefix on the instruction sheet.
Autobot Powerglide, not Powerglide

Also the entry for Protectobot Groove (which I got today) says that last 2 digits of the number stamped on back are 77, yet the one I got today is different. This one has 52431 stamped on the back.

For anyone who has these blindpacks still, can you confirm whether the back of the packaging has the same names that are in the database?

For those keeping score at home, I got the 1 blind pack at Family Dollar.

engledogg

#1
December 20, 2015, 03:07:30 PM Last Edit: December 21, 2015, 08:01:56 AM by engledogg
I recently learned that there was a second release of some of the waves of the Kre-O figures which lacked the last two digits found on the initial releases' packaging that told you which figure was inside the bag.

I'm not sure which waves were re-released...I do know that Wave 4 was one of them:
http://news.tfw2005.com/2015/02/11/kre-o-kreon-micro-changers-wave-4-sighted-in-family-dollar-182068

Here's a pack of Collection 2 I found on eBay:
http://www.ebay.com/itm/KRE-O-Transformers-Micro-Changers-Mystery-Pack-Collection-2-/131675573145?hash=item1ea879cb99:g:32sAAOSwcOFWbifc

The back of the pack's checklist has "Autobot Groove" and "Powerglide"...so, I suppose this would likely warrant the creation of new records to reflect the versions that lacked the identifier digits (and have a different checklist on the back of the packaging/instruction sheet if yours says "Protectobot Groove" and "Autobot Powerglide), right?

MIKE
engledogg

Dumba$$ that used to buy everything...not so much anymore.

Tripredacus

I will take some pics of this package because I can't find any online.

Tripredacus

Scan of the packaging back


Scan of Protectobot Groove's instruction outside

engledogg

Trips, can you confirm something else for me?  Did your new Series 2 figures come with the black brick that the first releases came with or did it come with a flat stand?

I found this over on TFW2005 and just wanted to make sure as this would definitely warrant new product pages.

Thanks!
MIKE
engledogg
Dumba$$ that used to buy everything...not so much anymore.

Tripredacus

Sorry for the delay (been busy). Will check when I get home if still needed.

Tripredacus

He comes with a flat, kre-o branded stand.


engledogg

Gotcha...thanks for the info!

MIKE
engledogg
Dumba$$ that used to buy everything...not so much anymore.

Go Up